Η εκφόρτωση των δεμάτων μεγάλου μήκους πρέπει να γίνεται είτε με “ζυγαριές” είτε με μακρείς ιμάντες. Τα προβαμμένα φύλλα δεν πρέπει να σύρονται μεταξύ τους.
- Characteristics
- Instructions
- Applications
- Certificates
PF-mLC
Domolam fire resistant panels are produced according to thestandard EN 14509:2013 and have CE marking.
THE INSULATION:
THE INSULATION:
Mineral wool is produced from mineral rocks and is a natural inorganic fibrous insulating material, internationally recognized for its thermal and sound insulating properties, as well as for its excellent behavior in high temperatures and fire.
Domolam insulating panels produced with Mineral Wool have reaction to fire A2s1d0 according to EN 13501-1, ΕΝ ISO 1716 and EN 13823. The wall panels (vertical partition - EN 1364-1) and the roof panels (horizontal partition - EN 1365-2) have certain fire resistance that can be seen on the above table, according to EN 13501-2.
They also have low water and air permeability indexes, while they provide a high sound absorption coefficient.
Thermal conductivity factor λ = 0,033 W/mK and average density 100±5 Kg/m3, according to EN 13162.
Average compression strengh 60 KPa.
Average tensile strengh 100 KPa.
Average shear strengh 50 KPa.
THE METALLIC SUPPORTS ARE:
– Pre-painted steel, in compliance with the EN 10169 standard, on hot dipped galvanized or aluzinc steel with yield strength 250-280 N/mm2 according to EN 10346 and EN 10143.
– Plastified anti-bacterial coated steel special for cold rooms and hygienic applications.
– Pre-painted, smooth or embossed aluminum, copper and stainless steel on demand.
JOINT TIGHTNESS:
Water Permeability: Class A, EN 12865
Air Permeability: 0.14 m3/m2/h at 50 Pa, EN 12114
DIMENSIONS TOLERANCES:
Thickness: ±2mm
Width: ± 3mm
Length: ±5mm
Rectangularity: ≤5mm
Storage
Should be tilted and covered in such a way as to ensure ventilation, in order to avoid vapor condensation and electrochemical corrosion.
Installation
After the installation, the protective film (if any) should be removed and the surface should be cleaned from cutting and drilling swarfs.
It is recommended that at least 2 fasteners should be used on each sheet and purlin, except for the top and bottom part of the sheet, where 3 are necessary.
Fastening should stop when the sheet starts deforming under the screw, to ensure the best aesthetic and static results.
The company is not responsible for any damage due to misuse of its products.
Fastening should stop when the sheet starts deforming under the screw, to ensure the best aesthetic and static results.
The company is not responsible for any damage due to misuse of its products.
| length (mm) | small | big | weight (kg/m) | weight (kg/m2) | quantity | price per unit (€) | value (€) | Comments |
Mineral wool panel
Domolam wall panels are used for interior or exterior walls and false ceilings. Available in 20 types are designed to satisfy the widest range of high aesthetics demands of industrial and residential constructions.
Domolam wall panels points of excellence
1. Produced with specially studied joint points in order to ensure that all external sheets remain at place with no visible screws.
2. Provide excellent air and water tightness and strength due to the innovative joint design.
3. Specially formed labyrinths contribute to the fire expansion delay and minimize smoke emission.
4. They have excellent flatness and dimensional precision with minimum joint gaps eliminating heat losses and CO2 emissions.
