Characteristics
Instructions
Applications
Certificates

CODE / ΚΩΔ.: PT-R 40/200

Table of allowed loads 1) Single span loading 2) 3-span loading

Technical specifications

Domolam insulating panels are produced according to the standard EN 14509:2013 and have CE marking.

THE INSULATION:
The polyurethane foam PUR is chemically neutral, non toxic and it is produced with environmental friendly technology with the use of pentane (CFC, HCFC free). Domolam insulating panels are produced with PUR foam with reaction to fire Cs3d0 or in altenatively they are produced with polyisocyanurate foam PIR High Index, with reaction to fire Bs1d0 according to EN 13501-1, ΕΝ 11925-2 and EN 13823.The wall panels (vertical partition - EN 1364-1) have fire resistance EI30: E 60 and the roof panels (horizontal partition -EN 1365-2) have fire resistance REI30: RE 60 for the thickness 100mm,according to EN 13501-2.
Domolam roof panels are classified as B_ROOF(t1) according to the standard CEN / TS 1187:2013.
Both PUR and PIR High Index foam contain a high percentage of closed cells >95% (waterproof/mould resistant) providing perfect adhesion to the supports.
Thermal conductivity factor λ=0,0215 W/mK and its average density is 40-42 Kg/m³ according to EN 13165.
Average comression strength 120 KPa.
Average adhession strength 140 KPa.
Average shear strength 100 KPa.

THE METALLIC SUPPORTS ARE:
-Pre-painted steel, in compliance with the EN 10169 standard, on hot dipped galvanized or aluzinc steel with yield strength 250-280 N/mm² according to EN 10346 and EN 10143.
-Plastified anti-bacterial coated steel special for cold rooms and hygienic applications.
-Pre-painted, smooth or embossed aluminum, copper and stainless steel on demand.

JOINT TIGHTNESS:
Water Permeability: Class A, EN 12865
Air Permeability: 0,14m3/m2/h at 50 Pa, EN 12114

DIMENSIONS TOLERANCES according to Annex D of ΕΝ 14509:

Corrugation height	±1mm
Pitch of profile	±2mm
Panel length	±10mm
Panel thickness	±2% of thickness
Squareness	0,6% useful width
Longitudinal bowing	2 mm/m - 10 mm
Camber	≤1% of width
Flatness	≤-1,5mm over 700mm
Edge waveness	±2mm over 500mm of length
Useful width	±2mm

Remarks
Slight leaking of foam from the joints, small foam vacuum or slight omissions and irregularities in the position of the gasket are acceptable, as long as the functional character of the panel is not compromised.

Transportation

Long packs should be unloaded either with the use of spreader beam or long belts. Pre-painted sheets should not be dragged.

Storage

Should be tilted and covered in such a way as to ensure ventilation, in order to avoid vapor condensation and electrochemical corrosion.

Installation

Follow the same instructions with the similar modular “Roman” tiles in purlins distance of 1050mm.

After the installation, the protective film (if any) should be removed and the surface should be cleaned from cutting and drilling swarfs.

It is recommended that at least 2 fasteners should be used on each sheet and purlin, except for the top and bottom part of the sheet, where 3 are necessary.
Fastening should stop when the sheet starts deforming under the screw, to ensure the best aesthetic and static results.
The company is not responsible for any damage due to misuse of its products.

PROJECT 29

RAL 8004 MAT

PROJECT 29

RAL 8004 MAT

PROJECT 29

RAL 8004 MAT

PROJECT 29

RAL 8004 MAT

PROJECT 29

RAL 8004 MAT

PROJECT 29

RAL 8004 MAT

PROJECT 29

RAL 8004 MAT

PROJECT 43

RAL 8004 MAT

PROJECT 55

RAL 7011 MAT

ISO 9001_Pagouni SA_Certificate of Managment System Registration_EN

			external plate			internal plate						width		length	packaging		quantity			Price
	code		material		thickness	material	protection	thickness	surface	insulation	thickness	operating	unit	length (mm)	small	big	weight (kg/m)	weight (kg/m2)	quantity	price per unit (€)	value (€)	Comments
Successfully added to cart Some options are missing Quantity is missing Length is missing	PT-R 40/200 PT-R 40/200	ROMAN TILES PANELS	RAL 1014 MAT RAL 7011 MAT RAL 8004 MAT	FILM	0.5	PVC WOOD RAL 9002	NO_FILM	0.45	EL.DIAM	B3	50	1000	m2		1					16

You might also need these products

Roman tile panel PT-R 40/200

Domolam “Roman” tiles are a smart and functional solution for residential buildings compared to the traditional roofing with ceramic tiles, combining features of low weight, reduced installation cost and excellent thermal insulation.

Domolam tile panels points of excellence

1. Produced with the Z-Lock innovation achieving hidden fixing.

2. Their standard length ensures modular assembly, reduced stock cost, easy order handling, distribution and installation.

3. Produced also in customized lengths, installed with visible fixing.

4. Their shape and material give particular aesthetic in residences.

5. Achieve huge energy saving contributing to the environmental protection by reducing CO₂emissions.